Watlow EZ-ZONE RMC Manual de usuario descargar pdf (Pagina 51)

Watlow EZ-ZONE

RMC Module • 48 • Chapter 3 Operations Page

RMC Module • Operations Page

Display

Parameter Name

Description

Range Default

Modbus

Relative

Address

CIP

Class

Instance

Attribute

hex (dec)

Probus

Index

Parameter

Data

Type

& Read/

Write

[`a;st]

[ A.St]

Alarm (1 to 8)

Alarm State

Current state of alarm

Startup (88)

None (61)

Blocked (12)

Alarm low (8)

Alarm high (7)

Error (28)

- - - - 1756

[offset 60]

0x6D

(109)

1 to 8

- - - - 9009 uint

No Dis-

play

Alarm (1 to 8)

Alarm Clearable

Read to see if alarm

can be cleared.

[``no] No (59)

[`YES] Yes (106)

- - - - 1762

[offset 60]

0x6D

(109)

1 to 8

0xC (12)

- - - - 9012 uint

No Dis-

play

Alarm (1 to 8)

Silenced

Read to see if alarm is

active but has been si-

lenced by Alarm Silence

Request.

Yes (106)

No (59)

- - - - 1760

[offset 60]

0x6D

(109)

1 to 4

0x0B (11)

- - - - 9011 uint

No Dis-

play

Alarm (1 to 8)

Latched

Read to see if alarm is

currently latched.

Yes (106)

No (59)

- - - - 1758

[offset 60]

0x6D

(109)

1 to 4

0x0A (10)

- - - - 9010 uint

[CUrr]]

[oPEr]]

Current Menu

Note: To use the current sensing feature, Time Base (Setup

Page, Output Menu) must be set to 0.7 seconds or more.

[`C;hi]

[ C.hi]

Current (1 to 4)

High Set Point

Set the current value

that will trigger a high

heater error state.

-1,999.000 to 9,999.000 50.0 1394

[offset 50]

0x73

(115)

1 to 4

- - - - 15008 float

RWES

[`C;Lo]

[ C.Lo]

Current (1 to 4)

Low Set Point

Set the current value

that will trigger a low

heater error state.

-1,999.000 to 9,999.000 0.0 1396

[offset 50]

0x73

(115)

1 to 4

- - - - 15009 float

RWES

[`CU;r]

[ CU.r]

Sensed Current (1 to 4)

Read

View the most recent

current value moni-

tored by the current

transformer.

-1,999.000 to 9,999.000 - - - - 1380

[offset 50]

0x73

(115)

1 to 4

- - - - 15001 float

No Dis-

play

Ammeter Current (1

to 4)

Read

RMS current value

monitored by the cur-

rent transformer.

0 to 9,999.00 - - - - 1392

[offset 50]

0x73

(115)

1 to 4

- - - - 15007 float

[`C;Er]

[ C.Er]

Current (1 to 4)

Error

View the cause of the

most recent load fault.

[nonE] None (61)

[Shrt] Shorted (127)

[open] Open (65)

- - - - 1382

[offset 50]

0x73

(115)

1 to 4

- - - - 15002 uint

Note:

Some values will be rounded off to fit in the four-character display. Full values can be

read with other interfaces.

Note:

If there is only one instance of a menu, no submenus will appear.

** These parameters/prompts are available in these menus with firmware revisions 6.0

and above.

R: Read

W: Write

E: EEPROM

S: User Set

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 235 236

Comentarios a estos manuales

Sin comentarios

Watlow EZ-ZONE RMC Manual de usuario Pagina 51

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Watlow EZ-ZONE RMC