Watlow EZ-ZONE RMC Manual de usuario descargar pdf (Pagina 192)

Watlow EZ-ZONE

RMC Module • 189 • Chapter 7 Features

Math

Sample and Hold

Range Low

Range High

Pressure Units

Altitude Units

Scale Low

Scale High

Function

Filter

Offset

Filter

If E = OFF, Output Value = Filter [A + Offset]

If E = ON, Output Value = Filter [last value

of A + Offset]

Display units follows Source A

Source Function A

Source Instance A

Source Zone A

Source Error A

Source Function B

Source Instance B

Source Zone B

Source Error B

Source Function C

Source Instance C

Source Zone C

Source Error C

Source Function D

Source Instance D

Source Zone D

Source Error D

Source Function E

Source Instance E

Source Zone E

Source Error E

Source Value A

Source Value B

Source Value C

Source Value D

Source Value E

Output Value

Error

Math

Dewpoint

Range Low

Range High

Pressure Units

Altitude Units

Scale Low

Scale High

Function

Filter

Offset

Filter

Output Value = Filter [427.26 * (CP *

B / 8.8618)

/ (17.27- (CP * B / 8.8618)) + 32 +

Offset]

Source A is used for Calculated

Pressure or CP ;

Note: For dewpoint, Source A is

temperature (F) and Source B is RH

(%). Saturation pressure calculation is

identical to that used in wet/dry

bulb. Result is in degrees F.

Source Function A

Source Instance A

Source Zone A

Source Error A

Source Function B

Source Instance B

Source Zone B

Source Error B

Source Function C

Source Instance C

Source Zone C

Source Error C

Source Function D

Source Instance D

Source Zone D

Source Error D

Source Function E

Source Instance E

Source Zone E

Source Error E

Source Value A

Source Value B

Source Value C

Source Value D

Source Value E

Output Value

Error

Output Function

This function configures and connects physical outputs to

internal functions.

Note:

Digital Outputs not included on these sheets

An error, when read, can indicate any of the following:

None, Open, Shorted, Measurement Error, Bad Cal Data,

Ambient Error, RTD Error, Fail, Math Error, Not Sourced,

Stale

Output

Overview

Instances - 0 to 8 per RMC

Output Value

Error

Output Low Power Scale

Output Time Base

Output Control

Output High Power Scale

Output Function

Output Function Instance

Output Source Zone

Output Source Error

[``o;u] Output Value : On, Off

[``Fn] Output Function : Off, Analog Input, Alarm, Cool Power, Heat

Power, Compare, Counter, Digital I/O. Proﬁle Event Out A to H,

Function Key, Logic, Linearization, Math, Process Value, Special

Function Output 1 to 4, Timer, Variable, Limit

[`o;Ct] Output Control : Fixed Time Base, Variable Time Base

[``Fi] Output Function Instance : 1 to 250

[`o;Lo] Output Low Power Scale : 0 to 100 %

[`o;hi] Output High Power Scale : 0 to 100 %

[`o;tb] Output Time Base : 0.1 to 60.0 seconds

[``S2] Output Source Zone : 0 to 16

[`S2;A] Source Zone A : 0 to 16

[otPt] Output Menu

[`SEt] Setup Page

[`o;ty] Output Type : Volts, Milliamps

[`S;Lo] Scale Low : 0.0 to 20.00

[`S;hi] Scale High : 0.0 to 20.00

[`r;Lo] Range Low : -1,999.000 to 9,999.000

[`r;hi] Range High : -1,999.000 to 9,999.000

[`o;CA] Calibration Offset : -1,999.000 to 9,999.000

[``o;u] Output Value : 0 to 10.0 volts or 0 to 20.00 milliamperes

[``Fn] Output Function : Off, Analog Input, Alarm, Cool Power, Heat

Power, Compare, Counter, Digital I/O. Proﬁle Event Out A to H,

Function Key, Logic, Linearization, Math, Process Value, Special

Function Output 1 to 4, Timer, Variable

1 2 ... 187 188 189 190 191 192 193 194 195 196 197 ... 235 236

Comentarios a estos manuales

Sin comentarios

Watlow EZ-ZONE RMC Manual de usuario Pagina 192

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Watlow EZ-ZONE RMC