Watlow MINICHEF Deep Fat Fryer Application Manual de usuario Pagina 19
- Pagina / 111
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Application 11 Watlow MINICHEF 2000 ■ 17
Initial Preheat
At power-up, the unit will preheat to the temperature value set in the Configuration
Mode [Etype] / [preHt]. The display will show [Pre-`] [`HEat] followed by oil tem-
perature as the oil heats.
When the unit reaches initial preheat temperature, [Ready] will flash once on the dis-
play and an audible tone will sound for 2 seconds. Then [`idle] will appear on the dis-
play. If Real Time Clock option is installed and [setUp] / [Cloc`] is set to [``yes],
the time of day will appear on the display.
Preheat
If in the Configuration Mode [SEtUP] / [ready] has been set to yes, the controller will
detect temperatures and preheat to operating temperature (above relative set point
minus the ready band) as required.
• Activate the menu by pressing the Start/Stop key.
If the fryer is not at operating temperature, it will preheat. Meanwhile:
The word [Pre-`] [`Heat] will appear on the display for a few moments. The
Start/Stop key indicator light will flash slowly. The temperature of Channel 1 will be
displayed until the operating temperature is reached.
The heat output indicator light - G, just below the display- will light up whenever
the controller is calling for heat.
When the fryer is at operating temperature (above relative set point minus the
ready band) [ready] will appear on the display and the Start/Stop key indicator
light will flash rapidly. You are now ready to cook with the active menu.
If the fryer is at operating temperature, the display goes directly to [ready] with-
out indicating preheat or temperature.
The Melt Cycle
To avoid burning, congealed oil requires a slow heating action. If, in the Configuration
Mode, [etype] / [melt] has been set to on, when the oil temperature is below 212ºF
the heat output will be limited to 10% of full power.
Run a Menu (with preheat feature)
This procedure describes how to run an active menu when the preheat feature is inac-
tive — in other words, when the [ready] parameter in the [setUp] function of the
Configuration Mode is set to [``yes].
AB
DE
C
F
GH
MINICHEF 2000
[`idle]
Edit Accept
Back-UpExit
SLOW
FLASH
AT OPERATING TEMPERATURE
(PREHEAT CONDITION MET)
RAPID
FLASH
B
DE
C
F
MINICHEF 2000
[100f`]
Edit Accept
Back-UpExit
B
DE
C
F
MINICHEF 2000
[ready]
Edit Accept
Back-UpExit
G H GH
A A
[pre-`] [`Heat]
DE
C
F
MINICHEF 2000
[`50`f]
Edit Accept
Back-UpExit
DE
C
F
MINICHEF 2000
[ready]
Edit Accept
Back-UpExit
AB
GH
AB
GH
DE
C
F
MINICHEF 2000
[`idle]
Edit Accept
Back-UpExit
AB
GH
- Deepfat Fryer 1
- Applications Guide 1
- Table of Contents 2
- Application 10 3
- INICHEF 2000 ■ 3 5
- INICHEF 2000 Application 10 10
- Manual Basket Lift 11
- Event Outputs 11
- Application 11 13
- Automatic Deepfat Fryer 13
- MINICHEF 2000 14
- INICHEF 2000 ■ 13 15
- -99 to 99ºF (-55 to 55ºC) 15
- Program Mode Quick Reference 16
- INICHEF 2000 Application 11 20
- INICHEF 2000 ■ 19 21
- Auxiliary Idle Set Points 22
- INICHEF 2000 ■ 21 23
- Application 12 25
- Manual Deepfat Fryer 25
- INICHEF 2000 ■ 25 27
- -99 to 99ºF (-55º to 55ºC) 27
- INICHEF 2000 Application 12 28
- INICHEF 2000 ■ 31 33
- INICHEF 2000 ■ 33 35
- Application 13 37
- Pressurized Automatic 37
- INICHEF 2000 ■ 37 39
- INICHEF 2000 Application 13 44
- Event outputs 45
- Cancel a menu 45
- Change menus or restart 45
- Application 14 47
- Application 15 57
- Pressurized Manual 57
- Application 16 67
- Application 17 77
- INICHEF 2000 ■ 77 79
- -99 to 99°F (-55 to 55°C) 79
- Run a Menu 83
- Application 18 85
- → 86
- Restart a Menu 94
- Change Menus 95
- Application 19 97
- INICHEF 2000 ■ 97 99
- INICHEF 2000 Application 19 100
- Your Company Logo 101
- Step 8 Operate the Controller 102
- Initial Preheat 103
- The Melt Cycle 104
- Cancel a Menu 105
- Change or Restart Menus 105
- Adjust a Menu While Cooking 105
- Timer Output 106
- Temperature Alarms 106
- Specifications (1032) 107
- INICHEF™ 2000 108
- MINICHEF 2000 Accessories 109
- Recommended Sources of Supply 109
- MINICHEF 2000 Documentation 109
- Watlow Controls 110
Relacionado con productos y manuales para Sensores Watlow MINICHEF Deep Fat Fryer Application
Sensores Watlow MLS Manual de usuario
(142 paginas)
(142 paginas)
Sensores Watlow NAFEM Gateway Manual de usuario
(51 paginas)
(51 paginas)
Sensores Watlow Power Series Rev H Manual de usuario
(72 paginas)
(72 paginas)
Sensores Watlow Power Series Manual de usuario
(72 paginas)
(72 paginas)
Sensores Watlow Power Series Manual de usuario
(72 paginas)
(72 paginas)
Sensores Watlow Power Series Manual de usuario
(28 paginas)
(28 paginas)
Sensores Watlow Power Series Manual de usuario
(28 paginas)
(28 paginas)
Sensores Watlow Power Series Manual de usuario
(72 paginas)
(72 paginas)
Sensores Watlow Power Series Manual de usuario
(28 paginas)
(28 paginas)
Sensores Watlow QPAC Manual de usuario
(34 paginas)
(34 paginas)
Sensores Watlow SBL Card Manual de usuario
(2 paginas)
(2 paginas)
Sensores Watlow SDAC Manual de usuario
(4 paginas)
(4 paginas)
Sensores Watlow Series 101 Manual de usuario
(6 paginas)
(6 paginas)
Sensores Watlow Series 102 Manual de usuario
(6 paginas)
(6 paginas)
Sensores Watlow Series 103 Manual de usuario
(6 paginas)
(6 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.054 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales