Watlow Series 935B Manual de usuario descargar pdf (Pagina 22)

22 Watlow Series 935B User’s Manual

Setting Inputs and Outputs

Key Input/Output Set-up Information

• All initial input and output set-up occurs in the Configuration Menu.

• Indication of °C or °F units of measure occurs only in the [`C_F] prompt.

• Sensor input type minimum and maximum range (see p. 53) is further

defined with Range Low [``rL] and Range High [``rh] to set the

working span of set points and remote set point scaling.

• Output 1 and Output 2 configure the prime functions of the Series 935B,

they are the “golden” prompts.

• Output 1 must be heat or cool to use Output 2 as a timer.

• Front Panel Lock [`FPL] requires a customer-supplied external switch

wired on Terminals 3 and 4. Switch open = unlocked; closed = locked.

Select this feature with [`rts] = [`fpl].

• Remote Timer Start requires a customer-supplied switch on Terminals 3

and 4. Switch closed= start. Select this feature with [`rts] = [tmr].

• Output 2 sets timer interval in hours:minutes [thM]

or minutes:seconds [tMS].

•

Display Default [dISP] lets you choose the primary (last 2 characters) and

secondary (first 2 characters) default displays. Press

to toggle to the

secondary display for 15 seconds.

[``Ac] = Normal Display: Actual Temperature

Secondary: None

[AcSP] = Normal Display: Set Point Temperature

Secondary: Actual Temperature

[Acti] = Normal Display: Time Remaining

Secondary: Actual Temperature

[TiAc] = Normal Display: Actual Temperature

Secondary: Time Remaining

[tiSP] = Normal Display: Set Point Temperature

Secondary: Time Remaining

Configuration Menu

[``In]

✓

Input Type

[`C_F]

✓

Celsius/Fahrenheit

[``rL]

✓

Input Range Low

[``rh]

✓

Input Range High

[`Ot1]

✓

Output 1 Function

[`Ot2]

✓

Output 2 Function

[`rts]

✓

Remote Timer Start

[dISP]

✓

Display Default

[ALty]

Alarm Type

[AhYs]

Alarm Hysteresis

[`LAt]

Alarm Latch

[`SIL]

Alarm Silencing

[FAIL]

Failure Mode

[tIM]

Timer Function

[Strt]

Start Timer

[`rdY]

Timer Ready Band

[``St]

Signal Time

[SLOC]

Set Point Lockout

[`tAG]

Lockout Tag

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 59 60

Comentarios a estos manuales

Sin comentarios

Watlow Series 935B Manual de usuario Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Watlow Series 935B