Watlow Addendum to EZwarePlus Manual de usuario descargar pdf (Pagina 13)

For part numbers like… with… For PLC type choose… For PLC I/F choose…

PMxxxxx-2xxxxxx

EZKx-2xxx-xxxx

RMAx-x2xx-xxxx

Modbus RTU Modbus RTU Master RS-232 or RS-485 2W*

PMxxxxx-3xxxxxx

EZKx-3xxx-xxxx

RMAx-x3xx-xxxx

Modbus TCP Modbus TCP/IP Master Ethernet

Other Watlow Controllers Modbus RTU Modbus RTU Master RS-232 or RS-485 2W*

*Both 232 and 485 are available; choose the one to which you have connected the OIT.

11) For the Modbus RTU

Master…

• For COM, choose the

communications port to

which you have

connected the

controller. Typically

this is COM 1.

• For Baud rate, choose

the rate that is set in the

controller.

(004)

• For Data bits, choose 8 Bits.

• For Parity, choose None.

• For Stop bits, choose 1 Bit.

• For multiple controllers on the same port, for Turn around delay (ms), enter 15 and for Send

ACK delay (ms) enter 15.

• Click OK.

12) For the Modbus

TCP/IP Master…

• For IP address, enter

the IP address of the

controller.

• Click OK.

13) Click OK to close the

Device Properties

dialog.

(005)

Silver Series EM OIT  13  Watlow Addendum

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 49 50

Sin comentarios

Watlow Addendum to EZwarePlus Manual de usuario Pagina 13