Watlow CAS200 Manual de usuario descargar pdf (Pagina 51)

CAS200 User’s Guide Chapter 3: Using the CAS200

Watlow Anafaze 39

When you load a job, Job display shows you this screen:

If you remotely loaded the job, Job display looks like this:

If you modify a job's parameters while the job is running,

you'll see this message:

If an alarm occurs, the scanner switches to Single Channel

Display.

Change Setpoint

To change the set point, go to the Single Channel Display

of the channel you want to change, and press the Change

Setpoint key (the set point is the desired temperature, pH,

et cetera, for the process). You should see a display like

this:

• Press Yes to change the set point.

• Then press Yes or No to change the set point value.

• When you are satisfied with the set point value you

have chosen, press Enter to save your changes and

return to Single Channel Display; or

• To return to Single Channel Display without saving

your changes, press No or Back.

CHANNEL PROCESS UNITS

CHANNEL NAME ALARM STATUS

JOB 3 RUNNING

CHANNEL PROCESS UNITS

CHANNEL NAME ALARM STATUS

JOB 3 RUNNING

REMOTELY LOADED

CHANNEL PROCESS UNITS

CHANNEL NAME ALARM STATUS

JOB 3 RUNNING

DATA MODIFIED

CHANNEL PROCESS UNITS

CHANNEL NAME ALARM STATUS

03 SETPOINT ?

500 ˚ F

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 123 124

Sin comentarios

Watlow CAS200 Manual de usuario Pagina 51