Watlow CAS200 Manual de usuario descargar pdf (Pagina 23)

CAS200 User’s Guide Chapter 2: Installation

Watlow Anafaze 11

Other Tools:

You will also need these tools:

• Phillips head screwdriver

• Flathead screwdriver for wiring

• Multimeter

Mounting the Scanner

Mount the scanner before you mount the TB50 or do any

wiring. The scanner's placement affects placement and

wiring considerations for the other components of your

system.

You receive one of two types of mounting brackets with

your scanner, the mini-bracket or the collar bracket. Refer

to the corresponding sections below for instructions.

Steps Using the Mini-Bracket

1. Cut a hole in the panel to the dimensions shown in the

illustration below. To do this, use a punch, nibbler, or

jigsaw, and ﬁle the edges of the hole.

2. Insert the scanner into the hole through the front of

the panel.

3. Screw the top and bottom clips in place: insert the

clip’s lip into the cutout in the scanner’s metal housing

just behind the front panel. Tighten the screws.

4. If you expect much panel vibration, use a rear support

for the scanner and its interconnecting cables.

Figure 2.3 Mounting with the Mini-Bracket

1.80 in. ±0.02 in.

(45.7mm ±0.5mm)

Maximum Panel

Thickness

3.63 in. ±0.02 in.

(92.2mm ±0.5mm)

0.2 in. (5mm)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 123 124

Sin comentarios

Watlow CAS200 Manual de usuario Pagina 23