Watlow Silver Series Manual de usuario Pagina 105

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 204
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 104
Using EZware-5000 97
To configure the Extended Memory tab settings:
The Extended Memory tab is used to configure the extended memory for saving data to an SD card or USB flash drive
(only USB1 can be used). There are 10 files that can be configured for saving data, em0.emi through em9.emi. Each
extended memory location can be accessed using the Device Type setting in an object’s properties. There is no
address limitation for the extended memory other than the size of the SD card or USB drive connected to the HMI.
The HMI will assume 16-bit data registers for unused addresses, so if address 100 is used for em0.emi, the memory
storage must have at least 200 bytes of available memory.
Extended memory files (*.emi) can be edited and converted to *.csv file format using the Recipe/Extended
Memory Editor, which can be opened with Project Manager.
1010-1007, Rev. 10
Vista de pagina 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 203 204

Comentarios a estos manuales

Sin comentarios