Watlow DIN-A-MITE Style A Manual de usuario descargar pdf (Pagina 6)

DIN-A-MITE Style A, solid-state power controller

Part Number D A 1 0 - __ __ __ __ - 0 __ __ __

Phase

1 = 1-phase, 1 controlled leg

Cooling & Current Rating

0 = Natural convection current rating

18A @ 50°C

ote: See derating curve for current rating

t other temperatures.

Line & Load Voltage

02 = 24 to 48VÅ (ac)

24 = 120 to 240VÅ (ac)

60 = 277 to 600VÅ (ac)

Input Type

C0 = 4.5 to 32VÎ (dc) contactor

K1 = 24 to 48VÅ (ac) contactor

K2 = 100 to 120VÅ (ac) contactor

K3 = 200 to 240VÅ (ac) contactor

F0 = 4 to 20 mAÎ (dc) proportional

Manual Language

0 = English

1 = German

2 = Spanish

3 = French

Custom Parts Designation

00 = Standard parts

Output Rating Curve

25 30 35 40 45 50 55 60 65 70 75 80 85

Current (Amps) into 

a Resistive Load

Maximum Ambient Temperature (°C)

Ratings at 100% on



Specifications

Ordering Information

Operator Interface

• Command signal input

• Input indicator LED

Amperage

• Single-phase, 18 A output maximum at 50°C (122°F) into a resistive

load. See the output rating curve.

• Maximum I

t for fusing: 4,000 A

sec

• Holding current: 100 mA minimum

• Latching current: 200 mA minimum

• Power dissipation: 1.2 watts per amp switched

• 200KA SCCR with recommended fusing

Line Voltage

• 24 to 48VÅ (ac) units: 20VÅ (ac) minimum to 53VÅ (ac) maximum

• 120 to 240VÅ (ac) units: 48VÅ (ac) minimum to

265 VÅ (ac) maximum

• 277 to 600VÅ (ac) units: 85VÅ (ac) minimum to 660VÅ (ac)

maximum

• Off-state leakage: 1 mA at 25°C (77°F) maximum

• 50/60 Hz. independent

Control Mode, Zero Cross

• Input Control Signal Type C: VÎ (dc) input contactor.

To increase service life, the cycle time should be less

than 3 seconds.

• Input Control Signal Type K: VÅ (ac) input contactor. To increase

service life, the cycle time should be less than 3 seconds.

• Input Control Signal Type F: 4 to 20 mAÎ (dc)

proportional variable time base control.

Input Command Signal

• AC contactor

24 VÅ ±10%, 120VÅ +10%/-25%, 240VÅ (ac) +10%/-25% @ 25 mA

maximum per controlled leg

• Do not use the DIN-A-MITE Vac-input models with a temperature

controller that includes an RC snubber circuit across its output.

Remove the RC snubber circuit before placing the DIN-A-MITE into

service.

• DC Contactor

4.5 to 32VÎ (dc): maximum current @ 4.5VÎ (dc) is 8 mA per leg.

• Loop powered linear current

4 to 20 mAÎ (dc): loop-powered. Input Type F0 option only.

(Requires current source with 6.2VÎ (dc) available. No more than

three DIN-A-MITE inputs can be connected in series.)

Agency Approvals

• UL

508-listed and C-UL

File E73741

• CE with proper filter:

EN 61326 Industrial Immunity Class A Emissions

EN 50178 Safety requirements

Input Terminals

• Compression: Will accept 0.2 to 1.5 mm

(24 to 16 AWG) wire

• Torque to 0.5 Nm (4.4 in-lb) maximum with a 3.5 mm (1/8 in) blade

screwdriver

• Strip 5.5 mm (0.22 in)

Line and Load Terminals

• Compression: Will accept 0.75 to 10 mm

(18 to 8 AWG) wire

• Torque to 1.4 Nm (12 in-lb) with a 6.4 mm (1/4 in) blade screwdriver,

or Type 1A #2 Pozi driver .

• Retorque after 48 hours to minimize wire cold flow.

• Retorque line and load terminals every 3 to 6 months.

• Strip 6.4 mm (0.25 in)

Operating Environment

• Up to 80°C. See the output rating curve chart for your application.

• 0 to 90% RH (relative humidity), non-conden sing

6 WATLOW DIN-A-MITE Style A User's Guide

• Installation only tested to 3,000 meters

• Units are suitable for “Pollution degree 2”

• Contactor V‡ (ac/dc) To increase service life, the cycle time should be less

than three seconds

Mounting

Options include DIN rail or standard back panel mounting.

• The DIN rail specification is: DIN EN 50022, 35 mm by 7.5 mm

• Minimum clipping distance: 34.8 mm (1.37 in)

• Maximum clipping distance: 35.3 mm (1.39 in)

• Mount the cooling fins vertically

Weight

• 323 grams (11.40 oz)

Recommended Fuse and Fuse Holder

Fuse

Watlow

Semiconductor

Bussmann

Semiconductor

Watlow

Combination

Bussmann

Combination

20A 17-8020 FWC20A10F 0808-0325-0020 DFJ20

25A 17-8025 FWC25A14F 0808-0325-0025 DFJ25

32A 17-8030 FWP32A14F 0808-0325-0030 DFJ30

40A 17-8040 FWP40A14F 0808-0325-0040 DFJ40

Holders (single)

Fuse Watlow Bussmann Ferraz

Bussmann

Combination

20A 17-5110 - - - - USM1i - - - -

25A 17-5110 - - - - USM1i - - - -

32A 17-5114 - - - - USM141i - - - -

40A 17-5114 - - - - USM141i - - - -

15 to 30A 0808-0326-1530 - - - - - - - - CH30J1i

35 to 60 A 0808-0326-3560 - - - - - - - - CH60J1i

1 2 3 4 5 6 7 8 9

Comentarios a estos manuales

Sin comentarios

Watlow DIN-A-MITE Style A Manual de usuario Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Sensores Watlow DIN-A-MITE Style A