Watlow LogicPro Manual de usuario descargar pdf (Pagina 105)

LogicPro User’s Guide Chapter 8: Ladder Diagrams

Doc.# 28002-00 Rev 3.00 Watlow Anafaze 89

NOTE! The coil must always be the last element on a

rung. The editor issues a warning when a user at-

tempts to put the coil anywhere else.

Inserting Function Blocks

To add a Function Block to a Ladder diagram:

1. Select the [Function Block] tool. The Function

Block dialog box appears, as shown in Figure 8.4.

2. Select the type of Function Block you want:

Standard

- or -

Vendor Provided

- or -

User Defined

3. Select the name of the Function Block you want from the

list.

4. Click [OK].

5. Click the location on the screen where you want to insert

the Function Block. The Function Block appears in that

location. See Figure 8.5 and Figure 8.6 on page 90.

Figure 8.4 Function Block Dialog Box

You can place Function Blocks on an existing rung with

elements on either side, as shown in Figure 8.6 on page 90, or

you can insert the block along with a new rung. In either case,

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 295 296

Sin comentarios

Watlow LogicPro Manual de usuario Pagina 105