Watlow LogicPro Manual de usuario descargar pdf (Pagina 106)

Chapter 8: Ladder Diagrams LogicPro User’s Guide

90 Watlow Anafaze Doc.# 28002-00 Rev 3.00

the surrounding rungs and elements shift to accommodate the

newly added Function Block.

Figure 8.5 Rung Before Adding a Function

Block

Figure 8.6 Rung With a Function Block Added

NOTE! More detailed information on Function Block Dia-

grams and Function Blocks is available in Chap-

ter 9 and Chapter 10, respectively.

Connecting Function Blocks to Other Ladder Elements

You can add Ladder elements, such as contacts and coils, on

both sides of a Function Block. Figure 8.7 on page 91 shows

a Ladder diagram before additional elements are connected to

the Function Block, while Figure 8.8 on page 91 shows the

same Ladder diagram with the elements now included.

To connect Function Blocks to other Ladder elements:

1. Select the element type you want to add from the toolbar.

2. Position the pointer on the Ladder diagram where you

want to add the element, then click.

NOTE! Coils cannot be used on the input side of a Func-

tion Block.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 295 296

Sin comentarios

Watlow LogicPro Manual de usuario Pagina 106